Heavy Duty Drive & Transmission - Page 4


Huge Savings! Up to 20% off on Heavy Duty Drive & Transmission at Specs About Car, Page 4. Top brands include Timken, APR, MTC, IATCO, Arvin Meritor, & Complete Tractor. Hurry! Limited time offers. Offers valid only while supplies last.



Timken HB88508E Drive Shaft Center Support Bearing
Timken HB88508E Drive Shaft Center Support Bearing
By Timken
In Stock
$42.39
$42.38

mpn: HB88508E, ean: 0053893420264,

4.3 out of 5 stars with 8 reviews
Timken Drive Shaft Center Support Bearings provide load support for rotating shaft’s axis. These high-strength caps and bases provide optimal bearing support and load distribution. They feature multiple sealing which protect against contamination. These bearings are designed to accommodate both inch and metric shafting.Provides effective sealing for different conditions. Offers maximum load carrying capacity. Provides even load distribution. Enhances lubrication. Designed to accommodate both i


APR Billet Stainless-Steel Dogbone/Subframe Mount Insert version 2 MS100142
APR Billet Stainless-Steel Dogbone/Subframe Mount Insert version 2 MS100142
By APR
In Stock
$59.99

mpn: MS100142,

4.6 out of 5 stars with 25 reviews
The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise. The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-


APR Billet Stainless-Steel Dogbone/Subframe Mount Insert Version 1 MS100141
APR Billet Stainless-Steel Dogbone/Subframe Mount Insert Version 1 MS100141
By APR
In Stock
$59.99

mpn: MS100141,

4.9 out of 5 stars with 26 reviews
The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise. The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-


MTC 1010422/37910-28050 Drive Shaft Coupling Kit (Bolt sleeve OD: 12mm for Driveshaft part # 37910-28050 37910-28050 MTC 1010422)
MTC 1010422/37910-28050 Drive Shaft Coupling Kit (Bolt sleeve OD: 12mm for Driveshaft part # 37910-28050 37910-28050 MTC 1010422)
By MTC
In Stock
$41.02

mpn: 1010422 / 37910-28050, ean: 0849290077824,

4.2 out of 5 stars with 51 reviews
.


IATCO 108063-59-IAT 14'' x 1-3/4'' Easy Pedal Clutch (Two-Plate, 4-Paddle / 8-Spring, 3200 Plate Load / 1150 Torque, Super-Duty)
IATCO 108063-59-IAT 14" x 1-3/4" Easy Pedal Clutch (Two-Plate, 4-Paddle / 8-Spring, 3200 Plate Load / 1150 Torque, Super-Duty)
By IATCO
In Stock
$468.57

mpn: 108063-59-IAT, ean: 0602003044755,

4.4 out of 5 stars with 40 reviews
This clutch is 100 percent brand new, manufactured with OEM quality components and made in the USA. This clutch is to be installed in medium duty applications.Cover Material - Cast Iron.Replaces 108063-59. Oem quality. Made in USA. Used in multiple truck applications. Medium duty clutch assembly.


Meritor S4324709202 Part
Meritor S4324709202 Part
By Arvin Meritor
In Stock
$92.07
$90.00
You Save: 2%

mpn: S4324709202, ean: 0884879640228,

4.8 out of 5 stars with 52 reviews
Meritor PartVMRS Code: 013-009-070.


Timken 210527-X Drive Shaft Center Support
Timken 210527-X Drive Shaft Center Support
By Timken
In Stock
$27.43
$21.94
You Save: 20%

mpn: 210527-X, ean: 0085706028008,

4.4 out of 5 stars with 23 reviews
Timken is a leader in all bearing types, including standard anti-friction bearing configurations and advanced products such as housed units, integrated bearing assemblies, precision assemblies and FAA-approved aerospace bearings. Our expertise in advanced material conversion, finishing, gaging and assembly ensures high quality production of every Timken-made product.Precision engineered. Made With A Heavy-Gauge Steel Frame And A Pre-Greased, Sealed Bearing Design. Designed for long life.


Timken 210084-2X Drive Shaft Center Support
Timken 210084-2X Drive Shaft Center Support
By Timken
In Stock
$36.61

mpn: 210084-2X, ean: 0085706027834,

4.2 out of 5 stars with 41 reviews
Timken is a leader in all bearing types, including standard anti-friction bearing configurations and advanced products such as housed units, integrated bearing assemblies, precision assemblies and FAA-approved aerospace bearings. Our expertise in advanced material conversion, finishing, gaging and assembly ensures high quality production of every Timken-made product.Precision engineered. Made With A Heavy-Gauge Steel Frame And A Pre-Greased, Sealed Bearing Design. Designed for long life.


IATCO LP1989-138-IAT 330mm x 1-1/2'' Stamped Steel Clutch (Two-Plate, Push-Type, Round / 8-Spring, 2000 Plate Load / 650 Torque)
IATCO LP1989-138-IAT 330mm x 1-1/2" Stamped Steel Clutch (Two-Plate, Push-Type, Round / 8-Spring, 2000 Plate Load / 650 Torque)
By IATCO
In Stock
$292.57
$292.15

mpn: LP1989-138-IAT, ean: 0602003044427,

4.9 out of 5 stars with 37 reviews
This clutch is 100 percent brand new, manufactured with OEM quality components and made in the USA. This clutch is to be installed in medium duty applications.Replaces lp1989-138. Oem quality. Made in USA. Used in multiple truck applications. Medium duty clutch assembly.


IATCO 4305230-7-IAT Inspection Plate Kit, (Includes Cover, Grommet, 7'' Hose, Screws & Washers)
IATCO 4305230-7-IAT Inspection Plate Kit, (Includes Cover, Grommet, 7" Hose, Screws & Washers)
By IATCO
In Stock
$25.48
$25.38

mpn: 4305230-7-IAT, ean: 0602003043437,

4.2 out of 5 stars with 43 reviews
This inspection plate kit provides all necessary items to enclose the bell housing. The cover features a rubber grommet to ensure that no dirt or debris enters the bell housing. The 7'' clutch hose can be used with any clutch application.Replaces 4305230-7. Includes 7'' grease hose. Includes screws & washers. Opposite side & diagonal screw holes for easy removal.


IATCO 4305230-12-IAT Inspection Plate Kit (Includes Cover, Grommet, 12'' Hose, Screws & Washers)
IATCO 4305230-12-IAT Inspection Plate Kit (Includes Cover, Grommet, 12" Hose, Screws & Washers)
By IATCO
In Stock
$26.30

mpn: 4305230-12-IAT, ean: 0602003043451,

4.8 out of 5 stars with 58 reviews
This inspection plate kit provides all necessary items to enclose the bell housing. The cover features a rubber grommet to ensure that no dirt or debris enters the bell housing. The 12'' clutch hose can be used with any clutch application.Replaces 4305230-12. Includes 12'' grease hose. Includes screws & washers. Opposite side & diagonal screw holes for easy removal.


MTC 9272/04371-36030 Driveshaft U-Joint (Stake in Style 04371-36030 MTC 9272)
MTC 9272/04371-36030 Driveshaft U-Joint (Stake in Style 04371-36030 MTC 9272)
By MTC
In Stock
$14.97

mpn: 9272 / 04371-36030, ean: 0849290022169,

4.4 out of 5 stars with 20 reviews
U-Joint For Toyota.


IATCO 125489-IAT Spring-A-Just Clutch Adjuster
IATCO 125489-IAT Spring-A-Just Clutch Adjuster
By IATCO
In Stock
$27.03

mpn: 125489-IAT, ean: 0602003043536,

4.6 out of 5 stars with 42 reviews
This product is an adjustment mechanism used on 14'' & 15-1/2'' clutches. Replacement component used on multiple manufacturer's clutch assemblies.Replaces 125489. Spring-A-Just. Includes screws & washers. Oem quality.


IATCO 107621-1-IAT 350mm x 1-1/2'' Stamped Steel Clutch (Single-Plate, Push-Type, 4-Paddle/ 8-Spring, 2400 Plate Load / 500 Torque)
IATCO 107621-1-IAT 350mm x 1-1/2" Stamped Steel Clutch (Single-Plate, Push-Type, 4-Paddle/ 8-Spring, 2400 Plate Load / 500 Torque)
By IATCO
In Stock
$225.78
$223.86

mpn: 107621-1-IAT, ean: 0602003043871,

4.5 out of 5 stars with 9 reviews
This clutch is 100 percent brand new, manufactured with OEM quality components and made in the USA. This clutch is to be installed in medium duty applications.Replaces 107621-1. Oem quality. Made in USA. Used in multiple truck applications. Medium duty clutch assembly.


IATCO 23514177-IAT Series 60 Detroit Diesel Flywheel (Light-Weight)
IATCO 23514177-IAT Series 60 Detroit Diesel Flywheel (Light-Weight)
By IATCO
In Stock
$303.68
$290.60
You Save: 4%

mpn: 23514177-IAT, ean: 0602003042850,

4.2 out of 5 stars with 9 reviews
This product is a high quality flywheel used with Detroit series 60 engines. Manufactured to OEM specifications.Replaces 23514177. 118 ring gear teeth. 12 crank mounting bolt holes. 12 clutch mounting bolt holes. Oem quality.


Complete Tractor 1112-5988 Clutch Alignment Tool for Ford Tractor (1'' 15 Spline Disc 655'' Id Pilot Bearing)
Complete Tractor 1112-5988 Clutch Alignment Tool for Ford Tractor (1" 15 Spline Disc 655" Id Pilot Bearing)
By Complete Tractor
In Stock
$24.18
$24.16

mpn: 1112-5988, ean: 0611188569007,

4.7 out of 5 stars with 15 reviews
Tool for 1'', 15 Spline disc using .655'' ID pilot bearing. Ford new Holland 100% brand new aftermarket unit, not remanufactured.100% New aftermarket unit built to meet OEM specifications. 1-year warranty protects you after your purchase. Factory direct pricing with no middleman markup delivers exceptional value. Made in USA.


IATCO 125C-41-187-IAT 2'' Clutch Brake Washer (.187'' Thick)
IATCO 125C-41-187-IAT 2" Clutch Brake Washer (.187" Thick)
By IATCO
In Stock
$13.48

mpn: 125C-41-187-IAT, ean: 0602003043338,

4.3 out of 5 stars with 38 reviews
This product is a fiber washer used during the clutch installation process. The washer is installed between the clutch brake and front bearing cap.Replaces 125c-41-187.


Complete Tractor 1105-9280 Gasket Kit for Ford Holland (2N, 8N, 9N Tractor Dgk928)
Complete Tractor 1105-9280 Gasket Kit for Ford Holland (2N, 8N, 9N Tractor Dgk928)
By Complete Tractor
In Stock
$36.38
$36.37

mpn: 1105-9280, ean: 0611188563395,

4.7 out of 5 stars with 13 reviews
Differential gasket kit (6 gaskets) Ford new Holland 2N; 8N; 9N gasket kit for Ford Holland 2N, 8N, 9N TRACTOR Dgk928 100% brand new aftermarket unit, not remanufactured.100% New aftermarket unit built to meet OEM specifications. 1-year warranty protects you after your purchase. Factory direct pricing with no middleman markup delivers exceptional value. Made in USA.


Meritor 3108410 Part
Meritor 3108410 Part
By Arvin Meritor
In Stock
$79.64
$69.99
You Save: 12%

mpn: 3108410, ean: 0680502425091,

4.0 out of 5 stars with 30 reviews
Meritor PartVMRS Code: 017-009-001.


IATCO 3921263-IAT B Series Cummins Flywheel (5.9-L)
IATCO 3921263-IAT B Series Cummins Flywheel (5.9-L)
By IATCO
In Stock
$225.99
$223.53
You Save: 1%

mpn: 3921263-IAT, ean: 0602003042829,

4.7 out of 5 stars with 7 reviews
This product is a high quality flywheel used with Cummins 5.9l (B series) engines. Manufactured to OEM specifications.Replaces 3921263 & 4933458. 173 ring gear teeth. 8 crank mounting bolt holes. 12/2 clutch mounting bolt holes. Oem quality.



Viewing Page 4 of 5

View more products in Heavy Duty & Commercial Vehicles Parts.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - specsaboutcar.com. All Rights Reserved.